Quasar 10in rear display configuration

Plug the display into the till using both USBs



Note: If touching the till screen shows touches on the rear display

Go to control panel

Then go to tablet PC settings

Then press on the Setup button at the top of the window

Follow the on screen instructions



In display settings make sure the Make this my main display box is ticked for display 1

Set the Multiple Displays drop down to Extend these displays



Install the drivers for the display, making sure the display is plugged into the till, then restart the till



On the till create a Launch Batch File (44) status key, and set it to launch batch file 3

Make a button for this on the manager screen and call it RELOAD REAR DISPLAY