Samuel Smiths - Router Configuration

Zyxel

access via :63080 port

- zyxel router needs firewall set to low

- zyxel router needs ebm external ip address in remote management so it can be accessed

- zyxel router needs port fordwarding set

Draytek

Some sites are shipped by global4 without it being fully setup and seems as though their password is set to 37779777

This was the case at royal george but changed it to M@intel - rex agreed it would be the best.

access via :443 port

Some sites need https://xxx.xxx.xxx.xxx:443 some without https://

Setup remote access is > system maintenance > management > lan access tab > tick http server and https server - there are also settings in ipv4 management setup tab (See below)

Some sites have ip's entered in (think these may limit who can access it as robert raikes did have ip addresses there and one of them may have been old ebm address)

Since ticking http server and https server and rebooting these were removed (i think)

Tplink

access via :443 port

Eprom configuration

- Till needs ebm external ip address in mws config

- Ensure GW Address 1 - 4 in mws config is also set to local router ip (normally 192.168.1.254)

- Port forward to till 49152 on zyxel router